Book an Inspection
OzeanGate PU Injectra
One Component, Semi flexible, Hydrophobic PU G
 |
18KGS net weight |  |
Shelf Life : 1 year unopen |  |
EUROPE TECHNOLOGY |
Product description:
OzeanGate PU Injectra is a single component & hydrophobic polyurethane foam grout. It is suitable for different types of concrete leaking, crack and joint filing. By contact with the water or moisture, it foams as a close cell, semi-flexible and high density foam to seal off the concrete crack and stop the water leakage. It works to fill up the void and gap to stable the soil.
- Close-cell
- High density
- Semi Flexible
- Hydrophobic
- Steady foaming time
- Good bonding to the concrete
- Good tensile strength
- Non-toxic
- No chemical reaction to the water
- Single component
- User friendly
- Penetrate into small crack line through the high pressure injection grouting system
- Bathroom
- Kitchen
- RC Flat Roof
- Car Porch Roof
- Planter Box
- RC Watertank
- Lift Pit
- Basement Slab
- Diaphragm Wall
- Retaining Wall
- Balcony / Air-con Ledge
- Swimming Pool
- Feature Pond
- Void and Gap
- Construction Joint
Reaction time: 20 seconds with water
Setting time: 2 minutes with water
Expansion rate: more than 10 times from its original liquid volume after react with water/moisture
Density: 28kgs/m3
Bonding strength: more than 0.8N/mm2 depend on different surface
Viscosity: less than 300
Appearance: darkbrown in wet, light yellow when dry, yellow after exposed to UV
- Applicator are recommended to wear gloves, mask and goggles during the application
- In case of contact, wash teh affected area with water and soap
- No food or beverage are allowed during application
- Keep the material away from children
- Store in cool and dry place
OzeanGate SeaGuard
Water-Based PU Modified Liquid Membrane
|
18kgs/pail | |
Material to be stored in cool and dry place. | |
EUROPE TECHNOLOGY |
Product Description:
OzeanGate SeaGuard is a water-based PU modified liquid membrane. It is a liquid-type waterproofing coating and cure, to form a seamless, elastic waterproofing layer.
- Water-based
- Low VOC
- Applicable on damp surface
- Moisture cure
- High Elongation
- Good bonding strength
- Good waterproof
- Easy to apply
- Seamless
- User friendly
- Penetrate into small crack line through the high pressure injection grouting system
- RC flat roof
- Bathroom
- Planter Box
- RC Gutter
- Driveway
- Retaining Wall
- Lift Pit
- Balcony
- Car Porch Roof
- Brush
- Roller
- Broom
- High Pressure single hose spray machine
> Appearance in wet: Dark Coffee
> Appearance when cured: Black
> Elongation at break ASTM412: 1242.5%
> Crack bridging: 2mm
> Coverage:
Wall – 0.5kg/m2/coat
Floor – 0.75kg/m2/coat
With fibre net – 0.85kg/m2/coat
minimum in 2 coats application
> Dry film thickness:
Wall – 0.8mm (1kg)
Floor – 1.1mm (1.5kg)
With fibrenet – 1.4mm (1.7kg)
> Tensile strength ASTM412: 1.4Mpa
> Tear resistant ASTM D624: 8.7kgf/cm
> Hardness ASTM D2240: 35-25
> Vapor transmission ASTM E96: 0.49
> Solid content: 79%
- Applicator is recommended to wear gloves, mask and googles during the application
- In case of contact, wash the affected area with water and soap
- No food or beverage are allowed during the application
- Keep the material away from children
OzeanGate SeaProof
|
18kgs/pail | |
Material to be stored in cool and dry place. | |
EUROPE TECHNOLOGY |
Product Description:
OzeanGate SeaProof is a water-based acrylic liquid membrane. It is a liquid type coating and cure, to form as a seamless, elastic, heat proof, anti hair line crack and waterproofing layer.
- Water-based
- Low VOC
- Applicable on exposed area
- Anti hair line crack
- High Elongation
- Good bonding strength
- Waterproof
- Weather proof
- Seamless
- RC flat roof
- Car porch roof
- Bathroom
- Air-con ledge
- Balcony & Yard
- External Wall
- Metal roof & gutter
- Exposed area with slope
- Brush
- Roller
- High Pressure single hose spray machine
> Appearance: Milky white emulsion
> Solid content: 70%
> Density: 1.2
> Elongation at break ASTM412: > 482.8%
> Crack bridging: 1.2mm
> Tensile strength ASTM412: 6.5Mpa
> Tear strength ASTM D624: 54kgf/cm2
> Coverage:
Wall: 0.5kg/m2/Coat
Floor: 0.75kg/m2/Coat
With flberglass/mesh: 0.85Kg/m2/Coat.
Minimum in 2 coats application
> Dry film thickness:
Wall – 0.8mm (1kg)
Floor – 1.2mm (1.5kg)
With fibernet – 1.5mm (1.7kg)
> Colour: Grey & White
- Applicator is recommended to wear gloves, mask and googles during the application
- In case of contact, wash the affected area with water and soap
- No food or beverage are allowed during the application
- Keep the material away from children
OzeanGate IslandProof
High Strength Torch On Membrane
|
1m x 10m per roll | |
Material to be stored in cool and dry place. | |
EUROPE TECHNOLOGY |
Product Description:
OzeanGate IslandProof is a high strength pre-fabricated torch on type waterproofing membrane. There are 2 types: mineral and sand finishing surface. For mineral type, it can be applied for exposed and traffic-able, suitable for re-waterproofing and new RC concrete as well. For sand type, it usually needs to apply a protective screed and suitable to apply on new RC surface.
- Standard thickness
- Exposable to UV
- Traffic-able
- High tensile strength
- Puncture resistant
- Good bonding
- Best for maintenance work
- Kitchen area
- RC flat roof
- Balcony
- Car porch roof
- Driveway
- RC gutter
- Planter box
- Toilet / Bathroom
- Torch gun
- Roller (for primer)
> Appearance: Sand or Mineral finishing (the colour of mineral finishing could be different from batch to batch)
> Weight & thickness:
(a) Sand 4kg/m2 & 3mm;
(b) Mineral 4.5kgs/m2 & 3.6mm;
(c) Mineral 5kgs/m2 & 4mm.
> Dimension: 1m x 10m
> Crack bridging: > 2mm
> Tensile strength: > 5.4 Mpa
> Elongation at break: 63%
> A thin layer of primer by bitumen coating are required.
- Applicator is recommended to wear gloves, mask and googles during the application
- No food or beverage are allowed during the application
- Keep the material away from children
- Minimum 1 layer
- Overlap: 75mm
- Vertical height: 300mm upturn and above
